Chieves cutter Z801
Description of equipment
DESCRIPTION
| Chives cutter is a very interesting proposition for growers of onions as it enables very precise cutting of chives just before digging of onion by a digger. The machine is produced in two versions with working width of 1.2 and 1.5 m, so that the potential buyers will not have trouble in matching the machine to the technology of sowing onion used at their farms. The cutter consists of a frame to which are attached three ground hugging wheels, mechanical transmission and a set of mowing three heads. Particularly noteworthy is the fact that the machine has been designed in such a way that it is possible to mount it on the front and rear three point hitch suspension system of the cooperating tractor. Drive of the mowing heads is provided by the PTO and the mowing height is adjusted hydraulically from the tractor cabin. The operator has got the possibility of setting independent mowing height adjustment for the left and the right side of the machine in the range of 0 to 40 cm, so setting of the cutting knives to the rough terrain can be even more accurate. Each one from the three working cutting heads is equipped with two cutting knives. Their inclination angle 45º in relation to the ground and installation of specifically shaped covers of the mowing set cause that the tilting mowing heads produce air hypotension that lifts broken chieves upwards. Thanks to such effect there occurs very accurate, almost a hundred percent cleansing of onion from chives. It should also be noted that the described cutter is in some way a universal trimmer - it can be successfylly used with parsley, carrot or red beets; it also works well when mowing grass in orchards or cleaning wasteland from different types of weeds. It is recommended to aggregate the machine with the tractors of class with power min. 50 HP which have got four outlets of oil hydraulics. If the cooperating tractor has got two outlets of oil hydraulics, it is recommended to install additional 2-section hydraulic distributor on the cutter, which will make it easier to set mowing height more precisely. |
ADDITIONAL EQUIPMENT
| - 2-section hydraulic distributor | |
| - Automatic levelling (height maintenance) | |
| - Mounting only on the three hitch point suspension system (price reduction) |
Technical specification
| Working width (m) | 1,2 |
| Weight (kg) | 780 |
| Power demand (HP) | 50 |
| Efficiency (ha/h) | 0,7 |
| Drive | PTO 540 rpm. |
| Mowing height (cm) | 0 - 40 |
| Adjustability of mowing height | hydraulic |
| Working speed (km/h) | < 7 |
| Aggregating | mounted on the front or rear hitch point |
| Number of cutting heads (pcs.) | 3 |
| Number of knives on the head (pcs.) | 2 |
| Knife speed (rpm.) | ~ 1400 |
| Dimensions | |
| Length (m) | 1,81 |
| Width (m) | 1,62 |
| Height (m) | 1,216 |
| Working width (m) | 1,5 |
| Weight (kg) | 900 |
| Power demand (HP) | 60 |
| Efficiency (ha/h) | 0,9 |
| Drive | PTO 540 rpm. |
| Mowing height (cm) | 0 - 40 |
| Adjustability of mowing height | hydraulic |
| Working speed (km/h) | < 7 |
| Aggregating | mounted on the front or rear hitch point |
| Number of cutting heads (pcs.) | 3 |
| Number of knives on the head (pcs.) | 2 |
| Knife speed (rpm.) | ~ 1400 |
| Dimensions | |
| Length (m) | 2,00 |
| Width (m) | 1,95 |
| Height (m) | 1,24 |
| Working width (m) | 1,8 |
| Weight (kg) | 1100 |
| Power demand (HP) | 90 |
| Efficiency (ha/h) | 1,1 |
| Drive | PTO 540 rpm. |
| Mowing height (cm) | 0 - 40 |
| Adjustability of mowing height | hydraulic |
| Working speed (km/h) | < 7 |
| Aggregating | mounted on the front or rear hitch point |
| Number of cutting heads (pcs.) | 3 |
| Number of knives on the head (pcs.) | 2 |
| Knife speed (rpm.) | ~ 1400 |
| Dimensions | |
| Length (m) | 2,30 |
| Width (m) | 2,26 |
| Height (m) | 1,24 |
>> FOLDERS<<