Heros 1600 PHR
Heros 1600/15/PHR
Heros 1600/15/PHR
STANDARD EQUIPMENT
| - Tank of 1600 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
| - Field boom of working width 15 m. Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Oil hydraulics electric control. Own hydraulic system. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
| - Supportive air stream - enables carrying out the treatment with wind speed approx. 8 m/s (turbine driven with its own hydraulic engine) | |
| - Lightning installation | |
| - Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
| - TeeJet TT 110-03 slotted nozzles | |
| - 4-section pump of Italian company COMET - BP 280 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
| - Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
| - Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
| - ARAG upper mixer placed in the gate sieve under the lid | |
| - ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
| - Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
| - Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
| - Articulated-telescopic shaft | |
| - ARAG Bravo 300 S computer (5 liquid sections) + hydraulics |
ADDITIONAL EQUIPMENT
| - 5-position nozzleheads with two TT nozzles of wide stream | |
| - Side-placed mixer of Italian POLMAC company | |
| - Specialist nozzles | |
| - Ejector | |
| - External washer of the sprayer | |
| - Main tank washer | |
| - Hydrant connection | |
| - Transport wheels of the sprayer | |
| - Section filters (5 sections) | |
| - ARAG foam marker (+10 l of foam marker concentrate) | |
| - ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
| - ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
| - Pressure sensor for the computer | |
| - Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
| Tank capacity (l) | 1600 |
| Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
| System-washing tank | yes |
| Hand-washing tank | yes |
| Working width (m) | 15 |
| Boom stabilization | hydraulically forced (stabilization actuator in standard) |
| Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
| Oil hydraulics control | electric |
| Nozzles | TT with a wide stream |
| Pump | Comet BP 280 |
| Pump efficiency (l/min) | 280 |
| Valve | Arag 6-sections, manual with pressure compensation |
| Nozzleheads | Single with anti-drip valve |
| Lightning installation | standard |
| Dimensions | |
| Length (m) | |
| Width (m) | |
| Height (m) | |
Heros 1600/16/PHR
Heros 1600/16/PHR
STANDARD EQUIPMENT
| - Tank of 1600 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
| - Field boom of working width 16 m. Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Oil hydraulics electric control. Own hydraulic system. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
| - Supportive air stream - enables carrying out the treatment with wind speed approx. 8 m/s (turbine driven with its own hydraulic engine) | |
| - Lightning installation | |
| - Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
| - TeeJet TT 110-03 slotted nozzles | |
| - 4-section pump of Italian company COMET - BP 280 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
| - Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
| - Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
| - ARAG upper mixer placed in the gate sieve under the lid | |
| - ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
| - Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
| - Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
| - Articulated-telescopic shaft | |
| - ARAG Bravo 300 S computer (5 liquid sections) + hydraulics |
ADDITIONAL EQUIPMENT
| - 5-position nozzleheads with two TT nozzles of wide stream | |
| - Side-placed mixer of Italian POLMAC company | |
| - Specialist nozzles | |
| - Ejector | |
| - External washer of the sprayer | |
| - Main tank washer | |
| - Hydrant connection | |
| - Transport wheels of the sprayer | |
| - Section filters (5 sections) | |
| - ARAG foam marker (+10 l of foam marker concentrate) | |
| - ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
| - ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
| - Pressure sensor for the computer | |
| - Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
| Tank capacity (l) | 1600 |
| Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
| System-washing tank | yes |
| Hand-washing tank | yes |
| Working width (m) | 16 |
| Boom stabilization | hydraulically forced (stabilization actuator in standard) |
| Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
| Oil hydraulics control | electric |
| Nozzles | TT with a wide stream |
| Pump | Comet BP 280 |
| Pump efficiency (l/min) | 280 |
| Valve | Arag 6-sections, manual with pressure compensation |
| Nozzleheads | Single with anti-drip valve |
| Lightning installation | standard |
| Dimensions | |
| Length (m) | |
| Width (m) | |
| Height (m) | |
Heros 1600/18/PHR
Heros 1600/18/PHR
STANDARD EQUIPMENT
| - Tank of 1600 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
| - Field boom of working width 18 m. Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Oil hydraulics electric control. Own hydraulic system. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
| - Supportive air stream - enables carrying out the treatment with wind speed approx. 8 m/s (turbine driven with its own hydraulic engine) | |
| - Lightning installation | |
| - Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
| - TeeJet TT 110-03 slotted nozzles | |
| - 4-section pump of Italian company COMET - BP 280 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
| - Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
| - Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
| - ARAG upper mixer placed in the gate sieve under the lid | |
| - ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
| - Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
| - Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
| - Articulated-telescopic shaft | |
| - ARAG Bravo 300 S computer (5 liquid sections) + hydraulics |
ADDITIONAL EQUIPMENT
| - 5-position nozzleheads with two TT nozzles of wide stream | |
| - Side-placed mixer of Italian POLMAC company | |
| - Specialist nozzles | |
| - Ejector | |
| - External washer of the sprayer | |
| - Main tank washer | |
| - Hydrant connection | |
| - Transport wheels of the sprayer | |
| - Section filters (5 sections) | |
| - ARAG foam marker (+10 l of foam marker concentrate) | |
| - ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
| - ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
| - Pressure sensor for the computer | |
| - Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
| Tank capacity (l) | 1600 |
| Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
| System-washing tank | yes |
| Hand-washing tank | yes |
| Working width (m) | 18 |
| Boom stabilization | hydraulically forced (stabilization actuator in standard) |
| Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
| Oil hydraulics control | electric |
| Nozzles | TT with a wide stream |
| Pump | Comet BP 280 |
| Pump efficiency (l/min) | 280 |
| Valve | Arag 6-sections, manual with pressure compensation |
| Nozzleheads | Single with anti-drip valve |
| Lightning installation | standard |
| Dimensions | |
| Length (m) | |
| Width (m) | |
| Height (m) | |
Heros 1600/20/PHR
Heros 1600/20/PHR
STANDARD EQUIPMENT
| - Tank of 1600 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
| - Field boom of working width 20 m. Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Oil hydraulics electric control. Own hydraulic system. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
| - Supportive air stream - enables carrying out the treatment with wind speed approx. 8 m/s (turbine driven with its own hydraulic engine) | |
| - Lightning installation | |
| - Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
| - TeeJet TT 110-03 slotted nozzles | |
| - 4-section pump of Italian company COMET - BP 280 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
| - Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
| - Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
| - ARAG upper mixer placed in the gate sieve under the lid | |
| - ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
| - Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
| - Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
| - Articulated-telescopic shaft | |
| - ARAG Bravo 300 S computer (5 liquid sections) + hydraulics |
ADDITIONAL EQUIPMENT
| - 5-position nozzleheads with two TT nozzles of wide stream | |
| - Side-placed mixer of Italian POLMAC company | |
| - Specialist nozzles | |
| - Ejector | |
| - External washer of the sprayer | |
| - Main tank washer | |
| - Hydrant connection | |
| - Transport wheels of the sprayer | |
| - Section filters (5 sections) | |
| - ARAG foam marker (+10 l of foam marker concentrate) | |
| - ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
| - ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
| - Pressure sensor for the computer | |
| - Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
| Tank capacity (l) | 1600 |
| Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
| System-washing tank | yes |
| Hand-washing tank | yes |
| Working width (m) | 20 |
| Boom stabilization | hydraulically forced (stabilization actuator in standard) |
| Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
| Oil hydraulics control | electric |
| Nozzles | TT with a wide stream |
| Pump | Comet BP 280 |
| Pump efficiency (l/min) | 280 |
| Valve | Arag 6-sections, manual with pressure compensation |
| Nozzleheads | Single with anti-drip valve |
| Lightning installation | standard |
| Dimensions | |
| Length (m) | |
| Width (m) | |
| Height (m) | |
Heros 1600/21/PHR
Heros 1600/21/PHR
STANDARD EQUIPMENT
| - Tank of 1600 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
| - Field boom of working width 21 m. Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Oil hydraulics electric control. Own hydraulic system. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
| - Supportive air stream - enables carrying out the treatment with wind speed approx. 8 m/s (turbine driven with its own hydraulic engine) | |
| - Lightning installation | |
| - Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
| - TeeJet TT 110-03 slotted nozzles | |
| - 4-section pump of Italian company COMET - BP 280 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
| - Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
| - Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
| - ARAG upper mixer placed in the gate sieve under the lid | |
| - ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
| - Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
| - Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
| - Articulated-telescopic shaft | |
| - ARAG Bravo 300 S computer (5 liquid sections) + hydraulics |
ADDITIONAL EQUIPMENT
| - 5-position nozzleheads with two TT nozzles of wide stream | |
| - Side-placed mixer of Italian POLMAC company | |
| - Specialist nozzles | |
| - Ejector | |
| - External washer of the sprayer | |
| - Main tank washer | |
| - Hydrant connection | |
| - Transport wheels of the sprayer | |
| - Section filters (5 sections) | |
| - ARAG foam marker (+10 l of foam marker concentrate) | |
| - ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
| - ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
| - Pressure sensor for the computer | |
| - Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
| Tank capacity (l) | 1600 |
| Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
| System-washing tank | yes |
| Hand-washing tank | yes |
| Working width (m) | 21 |
| Boom stabilization | hydraulically forced (stabilization actuator in standard) |
| Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
| Oil hydraulics control | electric |
| Nozzles | TT with a wide stream |
| Pump | Comet BP 280 |
| Pump efficiency (l/min) | 280 |
| Valve | Arag 6-sections, manual with pressure compensation |
| Nozzleheads | Single with anti-drip valve |
| Lightning installation | standard |
| Dimensions | |
| Length (m) | |
| Width (m) | |
| Height (m) | |
Advertising brochures
>> FOLDERS <<