Heros 1300 PHH
Heros 1300/15/PHH
Heros 1300/15/PHH
STANDARD EQUIPMENT
- Tank of 1300 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
- Field boom of working width 15 m.Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Electric oil hydraulics control. Only one pair of hoses powering the hydraulic distributor. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
- Lightning installation | |
- Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
- TeeJet TT 110-03 slotted nozzles | |
- 4-section pump of Italian company COMET - BP 171 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
- Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
- Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
- ARAG upper mixer placed in the gate sieve under the lid | |
- ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
- Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
- Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
- Articulated-telescopic shaft |
ADDITIONAL EQUIPMENT
- 5-position nozzleheads with two TT nozzles of wide stream | |
- Electric control work/overflow | |
- Electric control work/overflow and pressure regulation | |
- Electric control of pressure and sections of the sprayer | |
- Side-placed mixer of Italian POLMAC company | |
- Specialist nozzles | |
- Ejector | |
- External washer of the sprayer | |
- Main tank washer | |
- Hydrant connection | |
- Transport wheels of the sprayer | |
- Section filters (5 sections) | |
- ARAG foam marker (+10 l of foam marker concentrate) | |
- ARAG Bravo 180 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) + hydraulics | |
- ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
- ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
- Pressure sensor for the computer | |
- Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
Tank capacity (l) | 1300 |
Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
System-washing tank | yes |
Hand-washing tank | yes |
Working width (m) | 15 |
Boom stabilization | hydraulically forced (stabilization actuator in standard) |
Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
Oil hydraulics control | elektric |
Nozzles | TT with a wide stream |
Pump | Comet BP 171 |
Pump efficiency (l/min) | 171 |
Valve | Arag 6-sections, manual with pressure compensation |
Nozzleheads | Single with anti-drip valve |
Lightning installation | standard |
Dimensions | |
Length (m) | |
Width (m) | |
Height (m) |
Heros 1300/16/PHH
Heros 1300/16/PHH
STANDARD EQUIPMENT
- Tank of 1300 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
- Field boom of working width 16 m.Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Electric oil hydraulics control. Only one pair of hoses powering the hydraulic distributor. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
- Lightning installation | |
- Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
- TeeJet TT 110-03 slotted nozzles | |
- 4-section pump of Italian company COMET - BP 171 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
- Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
- Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
- ARAG upper mixer placed in the gate sieve under the lid | |
- ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
- Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
- Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
- Articulated-telescopic shaft |
ADDITIONAL EQUIPMENT
- 5-position nozzleheads with two TT nozzles of wide stream | |
- Electric control work/overflow | |
- Electric control work/overflow and pressure regulation | |
- Electric control of pressure and sections of the sprayer | |
- Side-placed mixer of Italian POLMAC company | |
- Specialist nozzles | |
- Ejector | |
- External washer of the sprayer | |
- Main tank washer | |
- Hydrant connection | |
- Transport wheels of the sprayer | |
- Section filters (5 sections) | |
- ARAG foam marker (+10 l of foam marker concentrate) | |
- ARAG Bravo 180 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) + hydraulics | |
- ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
- ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
- Pressure sensor for the computer | |
- Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
Tank capacity (l) | 1300 |
Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
System-washing tank | yes |
Hand-washing tank | yes |
Working width (m) | 16 |
Boom stabilization | hydraulically forced (stabilization actuator in standard) |
Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
Oil hydraulics control | elektric |
Nozzles | TT with a wide stream |
Pump | Comet BP 171 |
Pump efficiency (l/min) | 171 |
Valve | Arag 6-sections, manual with pressure compensation |
Nozzleheads | Single with anti-drip valve |
Lightning installation | standard |
Dimensions | |
Length (m) | |
Width (m) | |
Height (m) |
Heros 1300/18/PHH
Heros 1300/18/PHH
STANDARD EQUIPMENT
- Tank of 1300 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
- Field boom of working width 18 m.Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Electric oil hydraulics control. Only one pair of hoses powering the hydraulic distributor. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
- Lightning installation | |
- Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
- TeeJet TT 110-03 slotted nozzles | |
- 4-section pump of Italian company COMET - BP 171 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
- Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
- Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
- ARAG upper mixer placed in the gate sieve under the lid | |
- ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
- Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
- Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
- Articulated-telescopic shaft |
ADDITIONAL EQUIPMENT
- 5-position nozzleheads with two TT nozzles of wide stream | |
- Electric control work/overflow | |
- Electric control work/overflow and pressure regulation | |
- Electric control of pressure and sections of the sprayer | |
- Side-placed mixer of Italian POLMAC company | |
- Specialist nozzles | |
- Ejector | |
- External washer of the sprayer | |
- Main tank washer | |
- Hydrant connection | |
- Transport wheels of the sprayer | |
- Section filters (5 sections) | |
- ARAG foam marker (+10 l of foam marker concentrate) | |
- ARAG Bravo 180 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) + hydraulics | |
- ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
- ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
- Pressure sensor for the computer | |
- Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
Tank capacity (l) | 1300 |
Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
System-washing tank | yes |
Hand-washing tank | yes |
Working width (m) | 18 |
Boom stabilization | hydraulically forced (stabilization actuator in standard) |
Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
Oil hydraulics control | elektric |
Nozzles | TT with a wide stream |
Pump | Comet BP 171 |
Pump efficiency (l/min) | 171 |
Valve | Arag 6-sections, manual with pressure compensation |
Nozzleheads | Single with anti-drip valve |
Lightning installation | standard |
Dimensions | |
Length (m) | |
Width (m) | |
Height (m) |
Heros 1300/20/PHH
Heros 1300/20/PHH
STANDARD EQUIPMENT
- Tank of 1300 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
- Field boom of working width 20 m.Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Electric oil hydraulics control. Only one pair of hoses powering the hydraulic distributor. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
- Lightning installation | |
- Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
- TeeJet TT 110-03 slotted nozzles | |
- 4-section pump of Italian company COMET - BP 205 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
- Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
- Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
- ARAG upper mixer placed in the gate sieve under the lid | |
- ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
- Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
- Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
- Articulated-telescopic shaft |
ADDITIONAL EQUIPMENT
- 5-position nozzleheads with two TT nozzles of wide stream | |
- Electric control work/overflow | |
- Electric control work/overflow and pressure regulation | |
- Electric control of pressure and sections of the sprayer | |
- Side-placed mixer of Italian POLMAC company | |
- Specialist nozzles | |
- Ejector | |
- External washer of the sprayer | |
- Main tank washer | |
- Hydrant connection | |
- Transport wheels of the sprayer | |
- Section filters (5 sections) | |
- ARAG foam marker (+10 l of foam marker concentrate) | |
- ARAG Bravo 180 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) + hydraulics | |
- ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
- ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
- Pressure sensor for the computer | |
- Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
Tank capacity (l) | 1300 |
Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
System-washing tank | yes |
Hand-washing tank | yes |
Working width (m) | 20 |
Boom stabilization | hydraulically forced (stabilization actuator in standard) |
Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
Oil hydraulics control | electric |
Nozzles | TT with a wide stream |
Pump | Comet BP 205 |
Pump efficiency (l/min) | 205 |
Valve | Arag 6-sections, manual with pressure compensation |
Nozzleheads | Single with anti-drip valve |
Lightning installation | standard |
Dimensions | |
Length (m) | |
Width (m) | |
Height (m) |
Heros 1300/21/PHH
Heros 1300/21/PHH
STANDARD EQUIPMENT
- Tank of 1300 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
- Field boom of working width 21 m.Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Electric oil hydraulics control. Only one pair of hoses powering the hydraulic distributor. The boom divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
- Lightning installation | |
- Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
- TeeJet TT 110-03 slotted nozzles | |
- 4-section pump of Italian company COMET - BP 205 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
- Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
- Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
- ARAG upper mixer placed in the gate sieve under the lid | |
- ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
- Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
- Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
- Articulated-telescopic shaft |
ADDITIONAL EQUIPMENT
- 5-position nozzleheads with two TT nozzles of wide stream | |
- Electric control work/overflow | |
- Electric control work/overflow and pressure regulation | |
- Electric control of pressure and sections of the sprayer | |
- Side-placed mixer of Italian POLMAC company | |
- Specialist nozzles | |
- Ejector | |
- External washer of the sprayer | |
- Main tank washer | |
- Hydrant connection | |
- Transport wheels of the sprayer | |
- Section filters (5 sections) | |
- ARAG foam marker (+10 l of foam marker concentrate) | |
- ARAG Bravo 180 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) | |
- ARAG Bravo 300 S computer (5 liquid sections) + hydraulics | |
- ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
- ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
- Pressure sensor for the computer | |
- Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
Tank capacity (l) | 1300 |
Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
System-washing tank | yes |
Hand-washing tank | yes |
Working width (m) | 21 |
Boom stabilization | hydraulically forced (stabilization actuator in standard) |
Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
Oil hydraulics control | electric |
Nozzles | TT with a wide stream |
Pump | Comet BP 205 |
Pump efficiency (l/min) | 205 |
Valve | Arag 6-sections, manual with pressure compensation |
Nozzleheads | Single with anti-drip valve |
Lightning installation | standard |
Dimensions | |
Length (m) | |
Width (m) | |
Height (m) |
Heros 1300/24/PHH
Heros 1300/24/PHH
STANDARD EQUIPMENT
- Tank of 1300 l capacity made of polythene. Three tanks hidden in one solid: main tank, clean water tank and hand-washing tank. | |
- Field boom of working width 24 m.Spreaded hydraulically independently (one-sided). Actuator for forced stabilization in the standard equipment. Electric oil hydraulics control. Only one pair of hoses powering the hydraulic distributor. The boom divided into 7 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
- Lightning installation | |
- Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
- TeeJet TT 110-03 slotted nozzles | |
- 4-section pump of Italian company COMET - BP 235 - assures proper efficiency and square structure of the heads and air chamber eliminate fluid pulsation | |
- Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
- Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
- ARAG upper mixer placed in the gate sieve under the lid | |
- ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration | |
- Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
- Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
- Articulated-telescopic shaft |
ADDITIONAL EQUIPMENT
- 5-position nozzleheads with two TT nozzles of wide stream | |
- Electric control work/overflow | |
- Electric control work/overflow and pressure regulation | |
- Electric control of pressure and sections of the sprayer | |
- Side-placed mixer of Italian POLMAC company | |
- Specialist nozzles | |
- Ejector | |
- External washer of the sprayer | |
- Main tank washer | |
- Hydrant connection | |
- Transport wheels of the sprayer | |
- Section filters (7 sections) | |
- ARAG foam marker (+10 l of foam marker concentrate) | |
- ARAG Bravo 180 S computer (7 liquid sections) | |
- ARAG Bravo 300 S computer | |
- ARAG Bravo 300 S computer + hydraulics | |
- ARAG Bravo 400 S computer + hydraulics (automatic shutting off of the liquid sections thanks to the generally accessible GPS signal) | |
- ARAG Bravo 400 S Seletron computer + hydraulics (automatic shutting off of thenozzles thanks to the generally accessible GPS signal) | |
- Pressure sensor for the computer | |
- Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
Tank capacity (l) | 1300 |
Tank type | Italian, polythene 3 in 1 (three tanks in one solid) |
System-washing tank | yes |
Hand-washing tank | yes |
Working width (m) | 24 |
Boom stabilization | hydraulically forced (stabilization actuator in standard) |
Boom description | controlled hydraulically independently (spreading, folding and lifting) - possibility of independent spreading of the boom |
Oil hydraulics control | electric |
Nozzles | TT with a wide stream |
Pump | Comet BP 235 |
Pump efficiency (l/min) | 235 |
Valve | Arag 7-sections, manual with pressure compensation |
Nozzleheads | Single with anti-drip valve |
Lightning installation | standard |
Dimensions | |
Length (m) | |
Width (m) | |
Height (m) |
Advertising brochures
>> FOLDERS <<