Optimal 400
Optimal 400/10
Optimal 400/10
STANDARD EQUIPMENT
|
|
- Tank of 400 l capacity made of polythene, closed by a hermetic lid with an air vent |
|
|
- Additional hand-washing tank of 15 l capacity |
 |
- Field boom of width 10 m with height regulation by means of crab winch, divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage |
 |
- Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm |
| - TeeJet TT 110-03 slotted nozzles | |
 |
- 2-section pump of Italian company COMET - BP 60 - assures proper efficiency and traingular structure of the heads and air chamber eliminate fluid pulsation |
 |
- 6-section control valve ARAG withou pressure compenastion (5 sections for the field boom and one for powering upper mixer) |
| - Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
| - Upper mixer placed in the gate sieve under the lid | |
|
|
- ARAG injector stirrer led directly from the pump, maintains the same level of working liquid concentration |
|
|
- Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel |
|
|
- Articulated-telescopic shaft |
| - Powder painting of the whole steel construction of the machine assures perfect protection against corrosion |
ADDITIONAL EQUIPMENT
| - Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
| - Electric control work/overflow | |
| - Electric control work/overflow and pressure regulation | |
| - Electric control of pressure and sections of the sprayer | |
| - Lightning instalation | |
| - Transport wheels of the sprayer | |
| - Section filters (5 sections) | |
| - ARAG foam marker (+10 l of foam marker concentrate) | |
| - ARAG Bravo 300 S computer | |
| - ARAG Bravo 180 S computer (5 liquid sections) |
| Tank capacity (l) | 400 |
| Tank type | polythene |
| System-washing tank | no |
| Hand-washing tank | yes |
| Working width (m) | 10 |
| Boom stabilization | lack |
| Boom description | spreaded manually, mechanical lifting, 5 sections |
| Nozzles | TT with a wide stream |
| Range of boom lifting (m) | 0,5-1,7 |
| Pump | Comet BP 60 |
| Pump efficiency (l/min) | 60 |
| Valve | Arag 6-sections, manual without pressure compensation |
| Working speed (km/h) | 3-10 |
| Liquid dosage (l/ha) | up to 800 |
| Efficiency (ha/h) | 3-6 |
| Weight (kg) | 190 |
| Power demand (HP) | 28 |
| Nozzleheads | single, with anti-drip valve |
| Lightning installation | option |
| Dimensions | |
| Length (m) | 0,97 |
| Width (m) | 2,12 |
| Height (m) | 1,78 |
Optimal 400/12 MIX
Optimal 400/12 MIX
STANDARD EQUIPMENT
| - Tank of 400 l capacity made of polythene, closed by a hermetic lid with an air vent | |
| - Additional hand-washing tank of 15 l capacity | |
| - Field boom of width 12 m with height regulation by means of crab winch, divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
| - Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
| - TeeJet TT 110-03 slotted nozzles | |
| - 3-section pump of Italian company COMET - BP 75 - assures proper efficiency and traingular structure of the heads and air chamber eliminate fluid pulsation | |
| - 6-section control valve ARAG withou pressure compenastion (5 sections for the field boom and one for powering upper mixer) | |
| - Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
| - ARAG upper mixer placed in the gate sieve under the lid | |
| - ARAG injector stirrer maintains the same level of working liquid concentration | |
| - Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
| - Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
| - Articulated-telescopic shaft |
WYPOSAŻENIE DODATKOWE
| - Automatic stabilization of the boom | |
| - Hydraulic lifting of the boom | |
| - Additional stabilization actuator | |
| - 5-position nozzleheads with two TT nozzles of wide stream | |
| - Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
| - Electric control work/overflow | |
| - Electric control work/overflow and pressure regulation | |
| - Electric control of pressure and sections of the sprayer | |
| - Side-placed mixer of Italian POLMAC company | |
| - Specialist nozzles | |
| - Ejector | |
| - Lightning instalation | |
| - Transport wheels of the sprayer | |
| - Section filters (5 sections) | |
| - ARAG foam marker (+10 l of foam marker concentrate) | |
| - ARAG Bravo 180 S computer (5 liquid sections) | |
| - ARAG Bravo 300 S computer (5 liquid sections) | |
| - Pressure sensor for the computer | |
| - Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
| Tank capacity (l) | 400 |
| Tank type | polythene |
| System-washing tank | no |
| Hand-washing tank | yes |
| Working width (m) | 12 |
| Boom stabilization | lack |
| Boom description | spreaded manually, mechanical lifting, 5 sections |
| Nozzles | TT with a wide stream |
| Range of boom lifting (m) | 0,5-1,7 |
| Pump | Comet BP 75 |
| Pump efficiency (l/min) | 75 |
| Valve | Arag 6-sections, manual without pressure compensation |
| Working speed (km/h) | 3-10 |
| Liquid dosage (l/ha) | up to 800 |
| Efficiency (ha/h) | 3-6 |
| Weight (kg) | 200 |
| Power demand (HP) | 28 |
| Nozzleheads | single, with anti-drip valve |
| Lightning installation | option |
| Dimensions | |
| Length (m) | 0,95 |
| Width (m) | 2,1 |
| Height (m) | 1,7 |
Optimal 400/12
Optimal 400/12
STANDARD EQUIPMENT
| - Tank of 400 l capacity made of resin and fibreglass, closed by a hermetic lid with an air vent | |
| - Additional hand-washing tank of 15 l capacity | |
| - Field boom of width 12 m with height regulation by means of crab winch, divided into 5 sections, after hitting an obstacle it leans backwards and forwards protecting nozzles and nozzleholders from damage | |
| - Single nozzleholders KRUKOWIAK with anti-drip valves placed on the acidproof tube every 50 cm | |
| - TeeJet TT 110-03 slotted nozzles | |
| - 3-section pump of Italian company COMET - BP 105 - assures proper efficiency and traingular structure of the heads and air chamber eliminate fluid pulsation | |
| - 6-section control valve ARAG without pressure compenastion (5 sections for the field boom and one for powering upper mixer) | |
| - Glyceric manometer with scale every 0,1 bar in the range 0 - 5 bar | |
| - ARAG upper mixer placed in the gate sieve under the lid | |
| - ARAG injector stirrer maintains the same level of working liquid concentration | |
| - Three levels of filtration outside the gate sieve: suction filter and self-cleaning filter at the control valve and filters in the nozzleholders. Cartridges of the suction and self-cleaning filters are made of stainless steel | |
| - Powder painting of the whole steel construction of the machine assures perfect protection against corrosion | |
| - Articulated-telescopic shaft |
ADDITIONAL EQUIPMENT
| - Automatic stabilization of the boom | |
| - Hydraulic lifting of the boom | |
| - Additional stabilization actuator | |
| - 5-position nozzleheads with two TT nozzles of wide stream | |
| - Italian ARAG valve with pressure compensation, where shutting off of one or few sections does not cause pressure drop (growth) on the other sections | |
| - Electric control work/overflow | |
| - Electric control work/overflow and pressure regulation | |
| - Electric control of pressure and sections of the sprayer | |
| - Side-placed mixer of Italian POLMAC company | |
| - Specialist nozzles | |
| - Ejector | |
| - Lightning instalation | |
| - Transport wheels of the sprayer | |
| - Section filters (5 sections) | |
| - ARAG foam marker (+10 l of foam marker concentrate) | |
| - ARAG Bravo 180 S computer (5 liquid sections) | |
| - ARAG Bravo 300 S computer (5 liquid sections) | |
| - Pressure sensor for the computer | |
| - Sensor of oil level in the liquid pump that cooperates with ARAG Bravo 300S computer |
| Tank capacity (l) | 400 |
| Tank type | resin and fibreglass |
| System-washing tank | no |
| Hand-washing tank | yes |
| Working width (m) | 12 |
| Boom stabilization | lack |
| Boom description | spreaded manually, mechanical lifting, 5 sections |
| Nozzles | TT with a wide stream |
| Range of boom lifting (m) | 0,5-1,7 |
| Pump | Comet BP 105 |
| Pump efficiency (l/min) | 105 |
| Valve | Arag 6-sections, manual without pressure compensation |
| Working speed (km/h) | 3-10 |
| Liquid dosage (l/ha) | up to 800 |
| Efficiency (ha/h) | 3-6 |
| Weight (kg) | 220 |
| Power demand (HP) | 28 |
| Nozzleheads | single, with anti-drip valve |
| Lightning installation | option |
| Dimensions | |
| Length (m) | 1,2 |
| Width (m) | 2,54 |
| Height (m) | 2,1 |
Advertising brochures
>> FOLDERS <<